Models
>
16871
16871
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 16871
Click on the best match to narrow your results.
- 16871 Craftsman Compressor (Air Compressor)
- 1687105 Snapper Lawn Tractor Accessories (Collector Kit - Rd (1695010))
- 1687106 Murray Chainsaw (Grass Mulcher Kit, 44-Inch)
- 1687106 Briggs and Stratton Lawn Tractor Accessories (1687106 - Grass Mulcher Kit, 44")
- 1687119 Briggs and Stratton Lawn Tractor Accessories (1687119 - Update Kit)
- 1687119 Murray Lawn Tractor Accessories (Update Kit)
- 1687120 Snapper Lawn Tractor Accessories (Low Cut Kit)
- 1687187 Simplicity Lawn Tractor (Tilt Steering Kit For Prestige Series)
- 1687195 Briggs and Stratton Lawn Tractor Accessories (1687195 - Pto Clutch Anchor Kit)
- 1687195 Murray Chainsaw (Pto Clutch Anchor Kit)
Keep searches simple, eg. "belt" or "pump".
$67.48
This kit is an OEM part direct from Craftsman for air compressors. This kit consists of the parts for building a piston cylinder in the compressor. It is recommended that you release air and unplug th...
In Stock
In Stock
In Stock
In Stock
In Stock
$4.99
This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the p...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Common Problems and Symptoms for 16871
Viewing 2 of 2Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Charles from GARRISON, TX
- Parts Used:
- K-0650
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more e head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more e head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Tucson, AZ
- Parts Used:
- ACG-408
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from PRESCOTT VLY, AZ
- Parts Used:
- D26615
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Was this instruction helpful to you?
Thank you for voting!