Models > 919-16763

919-16763 (Type 1) Craftsman Compressor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 919-16763

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...
In Stock
Order now and your part arrives by Mar 19
This is an OEM regulator repair kit for air compressors. This kit contains all the parts and instructions needed to restore a broken regulator. It is normal for the inner parts of the regulator to wea...
In Stock
Order now and your part arrives by Mar 19
$51.84
This part includes one black rubber belt for a compressor. It is sourced right from the original manufacturer. Over time, the belt can become brittle and break and will need to be replaced when this h...
In Stock
Order now and your part arrives by Mar 19
This is an OEM connecting rod and piston assembly for an air compressor. This assembly includes the cylinder tube, valve plate O-rings and a complete piston including the bearing. This assembly is usu...
In Stock
Order now and your part arrives by Mar 19
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many cause...
In Stock
Order now and your part arrives by Mar 19
$6.25
This is a rubber O-ring for a compressor. It creates a seal for the tube as it enters the head. This part is sourced directly from the original manufacturer, ensuring it is the correct fit. It measure...
In Stock
Order now and your part arrives by Mar 19
Fan
$16.56
This is a genuine replacement part sourced directly from the manufacturer. The fan is commonly found in Craftsman air compressors. This part is made of high-quality plastic, and is placed in the cyl...
In Stock
Order now and your part arrives by Mar 19
Genuine OEM replacement part designed for a variety of Air Compressors. This part is made out of Metal and it is Sold Individually. It does include sleeve. This item allows to connect two like-diamete...
On Order
This is a Henuine OEM Authorized replacement part designed for use with Air Compressors. This item is made out of Metal and it is sold individually. This part is used to keep the brush tight against t...
In Stock
Order now and your part arrives by Mar 19
$6.25
This is an OEM replacement part designed to fit Air Compressors. This nut is for the tube as it enters the head. It is made out of Metal and it is Sold Individually. To replace this item you would need a Wrench.
In Stock
Order now and your part arrives by Mar 19
Genuine DeWalt replacement part. rnIncludes 2 Carbon Brush with wire lead attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermitt...
On Order
$6.25
This O-ring is compatible with various models of compressors made by DeWALT, Black & Decker, and Bostitch. It is an authentic replacement part from original manufacturer. An O-ring is used to prevent ...
On Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 919-16763

Viewing 2 of 2
Air leak
Fixed by these parts
Fixing Fixing
How to fix it
No compressed air
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tim from Tucson, AZ
Parts Used:
ACG-408
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from PRESCOTT VLY, AZ
Parts Used:
D26615
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cary from SAGLE, ID
Parts Used:
N038785
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!