This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, ...
This is a genuine manufacturer sourced replacement kit designed for use with Campbell Hausfeld air compressors. Includes: Valve Plate, 2 Reed Valves & Pins, 3 Gaskets. The purpose of the valve plate ...
This is a genuine manufacturer sourced replacement regulator. It is specially designed for Campbell Hausfeld air compressors. This part adjusts the pressure of the air coming from the tank to the desi...
This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not...
This item is an original part from Campbell Hausfeld for use in compressors. The pressure switch unloader valve connects to the pressure switch. A wrench set and a screwdriver may be necessary during ...
This authentic item is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. It is an identical replacement for a missing or a damaged components that ...
This genuine OEM sourced replacement pressure switch is specially designed for Campbell Hausfeld air compressors. The purpose of this component is to control when the compressor should start and stop ...
An authentic manufacturer-sourced replacement part that is specially designed for use with Campbell Hausfeld air compressors. These special components are secured to the main frame helping to reduce v...
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 16, 2021
Do you ship to canada
For model number HL410100
Hello Mike, thank you for writing. Sadly no, we ship only within the continental USA. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
March 11, 2025
I need help to reset the cut-in an cut-out pressure.
It starts to charge the tank up to120 Lbs then shuts off.
Then it releases the air up to 75 Lbs and starts compressing again.
Should I change the pressure switch or is there a simple instruction to reset the cut-in and cut-out screws starting from a specific setting?
For model number HL410100
Hello John, Thank you for getting in touch. To reset the compressor, make sure it is unplugged. Next open the pressure switch cover, and adjust the screw to set the cut-in pressure and then plug it back in. The cut-out pressure is typically around 125 psi, while the cut-in pressure is around 100 psi. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
_WW_1.gif "Page A Diagram and Parts List for 2009 Campbell Hausfeld Compressor")
_WW_2.gif "Page B Diagram and Parts List for 2009 Campbell Hausfeld Compressor")
