Models > VT619600AJ

VT619600AJ Campbell Hausfeld Compressor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for VT619600AJ

Viewing 3 of 3
Other Parts Diagram and Parts List for Campbell Hausfeld Compressor
Other Parts
Pump Parts Diagram and Parts List for Campbell Hausfeld Compressor
Pump Parts
Tank Parts Diagram and Parts List for Campbell Hausfeld Compressor
Tank Parts
Keep searches simple, eg. "belt" or "pump".
Svc Compressor Pump Cw 75 X 51Mm – Part Number: VT4923
$331.09
Svc Compressor Pump Cw 75 X 51Mm
In Stock
Order now and your part arrives by May 21
Pressure Switch – Part Number: CW301300SJ
$189.47
This pressure switch is supplied directly from original equipment manufacturer. It is a customer designed item made for use with Campbell Hausfeld air compressors. The purpose of a pressure switch it ...
In Stock
Order now and your part arrives by May 21
Filter Element – Part Number: VT042500AV
$13.29
This replacement filter element is an authentic OEM item that is commonly utilized on Campbell Hausfeld air compressors. Its purpose is to filter out dust and debris from contaminating the engine with...
On Order
Wheel 10 In. Black Hub – Part Number: WA004000AV
$48.68
This is an authentic replacement part sourced directly from the manufacturer. The wheel is commonly found in Campbell Hausfeld air compressors. This part is made of high-quality plastic and rubber, ...
In Stock
Order now and your part arrives by May 21
Foot – Part Number: ST041600AV
This is an OEM part made for use on Campbell Hausfeld air compressors. This rubber foot attaches to the bottom of the tank. It does not need special tools to repair. Simply slide onto the tank's bar. ...
No Longer Available
Screw 1/4-20 X 3/4 – Part Number: ST074415AJ
$18.64
An authentic OEM sourced hardware that is specially produced for use with Campbell Hausfeld air compressors. This screw is a standard hardware that has multiple uses depending on the model of your equ...
In Stock
Order now and your part arrives by May 21
Piston Ring Set – Part Number: VT210401AJ
$80.38
Special Order
Axle Bolt – Part Number: ST033400AV
$7.79
This part is an OEM from Campbell Hausfeld. The axle bolt is compatible with many air compressors, and is sold individually. The metal bolt fastens the wheel to the base of the tank, providing movemen...
Special Order
Electric Motor 120/240v 56fr – Part Number: MC037100SJ
$453.96
A genuine item that is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld air compressors. It is an identical replacement for the electric motor which was origin...
In Stock
Order now and your part arrives by May 21
3/16 Inch Key – Part Number: KE000900AV
$6.51
In Stock
Order now and your part arrives by May 21
Oil Seal – Part Number: ST021600AV
$15.91
This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking betwee...
In Stock
Order now and your part arrives by May 21
Plascrew – Part Number: ST058502AV
$6.51
It is a genuine replacement part that is supplied directly from the original equipment manufacturer, it is specially designed for use with Campbell Hausfeld air compressors. For the correct location a...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Francis from CROWN POINT, NY
Parts Used:
ST021600AV
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
seal on the crankshaft was leaking oil
Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down into the bottom of the cap with a long socket slightly smaller than the bore. Put a little oil on the inside of the seal and put the cap back on. Reheated the flywheel somewhat again and tapped it back on the shaft with a brass drift. Put the belt and guard back on. Started the compressor. No more oil leaking around the shaft.
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More