It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch air compressors. The tap ball valve attaches to the tank and helps to drain water. This part can rust...
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Bostitch air compressors. This is the elbow connection that connects the delivery pipe to the pu...
This is a genuine Bostitch replacement part which is designed for air compressors. It is utilized to regulate the air pressure in the tank. Over time components may wear out and begin to fail eventual...
This authentic manufacturer-sourced Rilsan tube is designed for use with Bostitch air compressors. It connects directly to the check valve and serves as a high-quality replacement for a missing or dam...
This is an authentic item which is supplied directly from the original equipment manufacturer for use with Bostitch air compressors. It is a high-quality replacement for a missing or worn gasket which...
This is an authentic Bostitch replacement part manufactured for use with air compressors. The gauge has a plastic housing, clear cover, and is used to read the amount of pressure in the tank, or to re...
This is an original Bostitch replacement part manufactured for use with air compressors. This cast metal head covers the valve plate. It is recommended to replace the gaskets when servicing the head o...
This part is an OEM from Bostitch. The cylinder to valve plate gasket is made for use with several air compressors, and is sold individually. The cardboard composite gasket is fitted between the valve...
This is an original replacement part sourced directly from the manufacturer. The washer is commonly found in Bostitch air compressors. This part is made of metal, and is generally used in securing t...
It is an authentic OEM sourced replacement hardware which is specially designed for use with Bostitch air compressors. This is the special bolt which is used to secure the rubber foot, please note thi...
This is available as an individual replacement part. The valve plate fits between the plate gasket cylinder and the plate head gasket. A screwdriver may be needed during the replacement of this item. ...
Special Order
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
June 10, 2022
Compressor pumps up to about 120 psi. Rather than shutting off, it blows the safety valve and bleeds down to about 80 psi and keeps running and repeating the cycle. Reason, fix.
For model number CAP1560
this may be an indicator of a problem within the Valve Plate Assembly FIX10248601. The valve can be found on the top of each cylinder. To replace the valve, loosen the cap screws, remove, disassemble, replace the reed valves and gaskets and reattach the head plates to the cylinder. The Valve Plate Gasket is FIX12002979 and Plate Head Gasket is FIX10248604. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
What pressure regulator gauge should this model number use? Is it ab9051114? The gauge looks different it has higher pressure
For model number CAP1560
Hi Ray,
Thank you for your question. Yes, this would be the correct replacement gauge for your air compressor. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
