Models > 24A-070F766

24A-070F766 ((CSV070)(2005)) Troy-Bilt Chipper Shredder

Jump to:

Find Part by Name

Most Popular Parts for 24A-070F766

Viewing 12 of 130

WHEEL-GEAR 8-INCH INTE

★★★★★

(2)

$25.36

This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...

Nut-flglk 5/16-18

$6.51

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...

Order now and your part arrives by Jul 16

KIT- WHL IDLE 8 X

$56.68

8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.

Chipper Blade

$38.60

This is a genuine replacement part manufactured for use with chipper/shredders from Craftsman. This part connects to the impeller, which shreds or cuts debris into smaller pieces. You made need a all...

Nut-Wing 1/4-20

This is an authentic OEM supplied replacement part that is specially designed for use with walk-behind lawn mowers. In conjunction with a bolt which is sold separately, this part is generally used to ...

HOSE-VAC 4.0 X 75.

$211.43

DOOR-NOZZLE

$52.21

The nozzle door attaches to the nozzle and is made of plastic. This item is available as an individual replacement part. During replacement, it may require a screwdriver to help install this item corr...

BAG-CSV W/TROY-BIL

$333.85

It is an authentic OEM replacement part which is acquired directly from the original parts manufacturer for a Troy-Bilt Chipper/Shredder Vac. This Bag is used to hold wood shavings that are collected ...

Order now and your part arrives by Jul 16

CABLE-CONTROL CLUT

$52.16

BAG ASM-CSV CHUTE

$427.58

This is an authentic Troy-Bilt replacement part that is sourced from the original manufacturer to be used with walk-behind lawnmowers. The nylon bag assembly connects to the bag frame and is used to c...

LEVER-DOOR NOZZLE

$19.12

This is an original replacement part sourced directly from the manufacturer. The nozzle door lever is commonly found in Troy-Bilt chipper-shredders. This part is made of high-quality plastic, and is...

NOZZLE-HOSE 3.875

$102.84

This is an angle-tipped nozzle made by Troy Bilt for chipper/shredder vacs. This sturdy plastic nozzle fits onto the end of the 4" diameter hose, secured with clamp # 723-0295. The grip handle attache...

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions for 24A-070F766 Provided by Fix customers like you

Viewing 3 of 3

Customer:: Jay from GERRY, NY
Parts Used:: 734-04018C
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins

Not the exact fit

I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ronald from WAYNE, MI
Parts Used:: 734-04018C
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Front drive wheels were wore out

Unbolted old wheels and bolted new wheels to my lawn mower

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: MICHAEL from Kennewick, WA
Parts Used:: 734-04018C
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

The treads on the front drive wheels were worn down to the point that they provided little traction.

Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?