Models
>
245-689-719
245-689-719 (1995) MTD Chipper Shredder
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 245-689-719
Viewing 2 of 2_WW_1.gif "Page A Diagram and Parts List for 1995 MTD Chipper Shredder")
_WW_2.gif "Page B Diagram and Parts List for 1995 MTD Chipper Shredder")
Keep searches simple, eg. "belt" or "pump".
$31.80
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmis...
In Stock
Order now and your part arrives by Mar 21
This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rota...
In Stock
Order now and your part arrives by Mar 21
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Mar 21
$6.42
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Order now and your part arrives by Mar 21
On Order
$6.25
This is an authentic OEM part. The hardened metal, flat washer is compatible with a variety of tiller and tractor machines. The washer is most often fitted between the screw plug and the deck assembly...
On Order
$6.25
It is an authentic OEM part which is made for use with lawn and garden equipment. This is the special self-tap screw that helps to secure components together. If the hardware is missing or is damaged,...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
Special Order
In Stock
Order now and your part arrives by Mar 21
$17.25
It is a genuine manufacturer-sourced item which is specially designed for use with MTD blowers and chippers. This replacement thumb screw has a few different applications depending on the model of you...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is an authentic replacement part that is OEM sourced to be used with snowthrowers, tillers, and lawn tractors from Ryobi, Yard Machines, and MTD. The metal hex bolt is used with several different...
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- LISA M from BATESVILLE, AR
- Parts Used:
- 737-0300A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this instruction helpful to you?
Thank you for voting!