Models
>
TCS-3351PFS
TCS-3351PFS Tanaka Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$9.97
This is a genuine OEM replacement part, it is sold individually. By pressing the bulb, It will purge all of the air out of the carburetor. Then fuel will come up from the fuel tank through the fuel li...
In Stock
Order now and your part arrives by Apr 2
This is a pipe fuel assembly for a variety of lawn and garden equipment. This pipe is also known as a fuel line, and it is 160mm long by 5mm wide. This part feeds the carburetor with fuel by connectin...
No Longer Available
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
No Longer Available
This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the...
No Longer Available
This item has been sourced from the original manufacturer to ensure a high level of quality. The oil seal is intended to be used with trimmers, edgers, scooters, chainsaws, pole saws, gas powered dril...
No Longer Available
This is a genuine manufacturer-sourced component which is specially made for Tanaka and Hitachi chainsaws. It is an identical replacement for a missing or a faulty Guide Plate-B that was installed on ...
No Longer Available
$4.15
This is a genuine OEM sourced component which is specially produced for use with Tanaka and Hitachi lawn and garden equipment. It is an identical replacement for a missing or a damaged bolt that was i...
Special Order
$5.37
This genuine manufacturer sourced replacement component which is specially designed for use with Tanaka and Hitachi handheld lawn and garden equipment. It helps to distribute the pressure evenly betwe...
Special Order
$19.18
This part is available as an individual replacement. The metering diaphragm goes between the diaphragm gasket and the diaphragm cover. During replacement, it may require a screwdriver to help install ...
In Stock
Order now and your part arrives by Apr 2
$5.91
It is a genuine item that is supplied by the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The inlet screen helps to prevent dust and other harmful contami...
In Stock
Order now and your part arrives by Apr 2
This is a genuine manufacturer-approved part which is specially designed for use with Tanaka and Hitachi chainsaws. It is an identical replacement for a faulty or a missing knob gear that was installe...
No Longer Available
$4.30
This is a genuine replacement part sourced from the original manufacturer for use with chainsaws and hedge trimmers. The special hex socket head bolt is used with several different models of equipment...
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from SPRING HILL, FL
- Parts Used:
- 12318139130
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this instruction helpful to you?
Thank you for voting!