Models > PP5020AV

PP5020AV Poulan Chainsaw

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PP5020AV

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
On Order
If your engine is having trouble starting, you may be in need a new purge bulb. When the engine has been sitting for a while, unused, the fuel will drain and eventually dissolve out of the carburetor....
In Stock
This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris...
In Stock
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
In Stock
In Stock
This is a manufacturer-approved starter pulley kit. The starter kit is for rebuilding the chainsaw starter. This kit includes the starter pulley, assist spring, starter hub, and screws. Please be awar...
On Order
No Longer Available
In Stock
This is the replacement bar adjustment kit for your chainsaw. The kit includes a retainer ring, pin, and the adjustment bolt. The chainsaw bar adjustment kit is used to adjust the tension of the bar, ...
No Longer Available
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Louie
January 28, 2022
Problem starting when run for awhile/ starts good after cool down.
For model number PP5020AV
Fix.com logo
Hello Louie, thank you for writing. We recommend replacing the fuel filter Fix Number: FIX9285148. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair. We hope to hear from you soon.

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for PP5020AV

Viewing 4 of 4
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
Fixing
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
Fixing
How to fix it
Chain comes off guide bar
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mike from Noble, OK
Parts Used:
581481601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Rope pulled out and didn't retrieve
Pulled rope pull assembly housing, 4 screws and removed center screw that holds the eps plastic gear and spring was under neath that and it was bent out of shape. Important part is install new spring with yellow painted end outward , toward housing! Lucky I bought two??
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Fremont, NE
Parts Used:
575296301, 530016101
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
The saw started running too fast on idle and was over revving under light load.
I tried a few adjustment on the carb jets and the idle speed but it got worse. I opened it up and discovered that the carburetor was loose and the engine was sucking air at the carburetor mount. One of the nuts was lost so I ordered a replacement part and a spare in case it happens again. This saw has worn out at least 6 chains, three gui de bars and a sprocket. Had one other repair a year ago when it broke a clutch spring in the sprocket.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from West Roxbury, MA
Parts Used:
581481601
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Pull cord failed to retract
Removed cowling and spool. Spring drops in place without need for adjustment.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!