Models
>
PR4218
PR4218 (TYPE 2) Poulan Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PR4218
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$6.62
This chainsaw fuel line kit carries fuel from the tank into the carburetor and from the primer bulb to the fuel system. This part is mostly used on gas trimmers and blowers. The fuel lines are made fr...
In Stock
Order within the next 3 hrs and your part ships today!
$6.21
This is a tank purge line, also known as a fuel line kit, and it is used with various lawn equipment. The line connects fuel from the tank into the carburetor, and from the primer bulb back into the f...
In Stock
Order within the next 3 hrs and your part ships today!
$6.21
If your engine is having trouble starting, you may be in need a new purge bulb. When the engine has been sitting for a while, unused, the fuel will drain and eventually dissolve out of the carburetor....
On Order
$6.21
This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris...
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
$3.99
This part includes one OEM air filter for a chainsaw. We suggest having a few extra of these on-hand as they are a regular maintenance part that should be inspected and replaced regularly (at least on...
In Stock
Order within the next 3 hrs and your part ships today!
$6.21
This is a washer kit for a chainsaw. This kit includes the retaining washer, C-ring, and the washer that is located between the clutch and clutch drum assembly. The outer washer acts like a shoulder t...
In Stock
Order within the next 3 hrs and your part ships today!
$7.46
This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durab...
In Stock
Order within the next 3 hrs and your part ships today!
$28.63
This is an OEM recoil starter repair kit for a gas chainsaw. This kit consists of a plastic pulley, hub, return spring, and two screws. If the saw is having trouble starting, replacing the recoil star...
In Stock
Order within the next 3 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PR4218
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel line size - Important
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because
... Read more
the line has to Compress to go through the hole.
Read less
Was this instruction helpful to you?
Thank you for voting!
Worn out oil pump/burning chains
After checking several different videos, ordered the repair parts and two specialty tools( Clutch removal/install and a worm drive remover/installer) Total for parts and tools around 45.00. Much cheaper than the shop wanted, 85.00 to look at it plus parts. As for results I've used the chainsaw all afternoon no problem. Runs like it did 12
... Read more
yrs ago. Pumps oil the would make Jed Clampet proud
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danny from STEVENSON, WA
- Parts Used:
- 545160401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
I broke the original ring
Took chainsaw apart and replaced the ring.
Was this instruction helpful to you?
Thank you for voting!