Models
>
DCS431
DCS431 Makita Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DCS431
Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
On Order
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
In Stock
Order within the next 10 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- henry from DOLORES, CO
- Parts Used:
- 965-404-460
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Gas leaking from the side of the body when the fuel fill inlet was facing up. Determined that the fuel was leaking around the fuel line where it came out of the tank
Removed the handle, carburetor, and plastic piece under the carburetor to access the fuel line where it comes out of the tank.
Fished the fuel filter out the gas fill port and removed the fuel filter.
Ended up cutting the old fuel line where it enters the tank.
Removed the old fuel line pieces out from the top and bottom. ... Read more
Was having a tough time pressing the new line into the hole at the top of the tank so I added a dab of grease and it slipped right in.
Used a piece of thin wire to fish the new fuel line to the gas filler port in order to reinstall the gas filter.
Will install a new gas filter the next time the saw runs out of gas.
Fished the fuel filter out the gas fill port and removed the fuel filter.
Ended up cutting the old fuel line where it enters the tank.
Removed the old fuel line pieces out from the top and bottom. ... Read more
Was having a tough time pressing the new line into the hole at the top of the tank so I added a dab of grease and it slipped right in.
Used a piece of thin wire to fish the new fuel line to the gas filler port in order to reinstall the gas filter.
Will install a new gas filter the next time the saw runs out of gas.
Read less
Was this instruction helpful to you?
Thank you for voting!