Models
>
DCS430
DCS430 Makita Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DCS430
Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
$16.09
This is a genuine OEM approved replacement spark plug. It is commonly used with Makita power tools. The purpose of a spark plug is to deliver electric current from an ignition system to the combustion...
In Stock
Order now and your part arrives by Mar 29
This item has been sourced from the original manufacturer and is intended to be used with chainsaws from Makita. The rubber baffle is used to absorb motor vibration between the main chassis and the re...
No Longer Available
Special Order
$10.08
This is an authentic OEM supplied item, it is not an aftermarket imitation. It is specially made for use on Makita power tools. This is standard hardware which has multiple applications based on your ...
In Stock
Order now and your part arrives by Mar 29
This is an OEM M5X16 head bolt on the tubular handle of a chainsaw. If the handle feels loose, inspect this bolt for damage. It is not safe to operate a chainsaw if the handle is lose or damaged. If t...
In Stock
Order now and your part arrives by Mar 29
This replacement screw is a high quality item designed for use with Makita power cutters and chainsaws. It is an authentic item that is sourced directly from original equipment manufacturer and it is ...
In Stock
Order now and your part arrives by Mar 29
$11.76
This fuel line is a genuine OEM replacement part provided by the manufacturer. It is most commonly used in Makita chainsaws. This fuel line transfers fuel inside the machine. It is made of rubber, and...
In Stock
Order now and your part arrives by Mar 29
$19.66
It is a genuine item that is supplied by the original equipment manufacturer for use with Makita power cutters and chain saws. The radial ring attaches to the crankcase. A screwdriver might be necessa...
In Stock
Order now and your part arrives by Mar 29
$33.02
This is a genuine OEM approved replacement air filter assembly, it is specially designed for use with Makita chainsaws. Its purpose is to filter out dust and debris from the air that goes into the eng...
Special Order
$11.24
This item has been sourced from the original manufacturer to be used with chainsaws from Makita. The rubber buffer attaches to the saw's chassis assembly. This item is used to absorb vibration that is...
In Stock
Order now and your part arrives by Mar 29
$11.59
This replacement plug which is supplied directly from the original equipment manufacturer for use with Makita handheld lawn and garden equipment. It is specially designed to keep the fuel in the tank,...
Special Order
$5.20
This is an authentic manufacturer-sourced replacement part which is specially made for use with Makita chainsaws and power cutters. It is a standard hardware which may have multiple applications, plea...
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- henry from DOLORES, CO
- Parts Used:
- 965-404-460
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Gas leaking from the side of the body when the fuel fill inlet was facing up. Determined that the fuel was leaking around the fuel line where it came out of the tank
Removed the handle, carburetor, and plastic piece under the carburetor to access the fuel line where it comes out of the tank.
Fished the fuel filter out the gas fill port and removed the fuel filter.
Ended up cutting the old fuel line where it enters the tank.
Removed the old fuel line pieces out from the top and bottom. ... Read more
Was having a tough time pressing the new line into the hole at the top of the tank so I added a dab of grease and it slipped right in.
Used a piece of thin wire to fish the new fuel line to the gas filler port in order to reinstall the gas filter.
Will install a new gas filter the next time the saw runs out of gas.
Fished the fuel filter out the gas fill port and removed the fuel filter.
Ended up cutting the old fuel line where it enters the tank.
Removed the old fuel line pieces out from the top and bottom. ... Read more
Was having a tough time pressing the new line into the hole at the top of the tank so I added a dab of grease and it slipped right in.
Used a piece of thin wire to fish the new fuel line to the gas filler port in order to reinstall the gas filter.
Will install a new gas filter the next time the saw runs out of gas.
Read less
Was this instruction helpful to you?
Thank you for voting!