Models
>
49
49 (1996-01) Husqvarna Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 49
Viewing 10 of 10_WW_1.gif "Page A Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_2.gif "Page B Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_3.gif "Page C Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_4.gif "Page D Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_5.gif "Page E Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_6.gif "Page F Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_7.gif "Page G Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_8.gif "Page H Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_9.gif "Page I Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
_WW_10.gif "Page J Diagram and Parts List for 1996-01 Husqvarna Chainsaw")
Keep searches simple, eg. "belt" or "pump".
$3.99
This is a hex nut flange for your lawn and garden tools. It is size M8, meaning it has an 8mm inner diameter, and a 1.25 thread pitch. The hex nut has a washer like base to ensure the nut stays tight....
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
In Stock
Order within the next 7 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dennis from MACEO, KY
- Parts Used:
- 503492501
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Replaced worn chain guide
The chain guide on this model is held on with one screw and the 2 bolt studs with nuts that hold the bar and chain on. Now my 30 year old chainsaw is working great again !!
Was this instruction helpful to you?
Thank you for voting!