Models
>
CS-353ES
CS-353ES (C31926001001-C31926999999) Echo Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$3.99
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
$7.63
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
On Order
$7.72
This is a bevel gear, also referred to as a drive gear or tension gear, and is used in chainsaws. This authentically sourced part is sold individually. It is part of the chain tensioning assembly, aid...
In Stock
$4.99
The nut flange is part of the chain brake and is fastened onto the sprocket guard. It is sold individually, however, your equipment likely has a couple of these. If the housing cracks, this could caus...
In Stock
$7.72
This is a single bevel gear for a chainsaw. Your chainsaw has two bevel gears that allow you to adjust the chain tension. One has a post with a slot in it (for a screwdriver), which mates to a second ...
On Order
$5.54
This chain adjustment tensioner bolt (bar adjustment bolt) is sold individually. The bar adjustment bolt works with the adjuster gears and the adjustment pin to alter the tension on the cutting chain....
In Stock
$4.99
This is an OEM quality chain tensioner for a chainsaw. This part is attached to the adjustment screw and fits into an opening on the bar. When you turn the adjuster it moves the tensioner, which eithe...
On Order
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from SPRING HILL, FL
- Parts Used:
- 12318139130
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from ANNISTON, AL
- Parts Used:
- V450001610, C400001030, V450000710
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broke the front handle and stretched the to spring out
Removed the old handle by removing the 7 star bit bolts. Best to secure the bottom part first when installing the new handle.
Was this instruction helpful to you?
Thank you for voting!