Models
>
CS-350TES
CS-350TES Echo Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CS-350TES
Viewing 7 of 7_WW_1.gif "Air Cleaner Carburetor Muffler Diagram and Parts List for Echo Chainsaw")
_WW_2.gif "Auto-Oiler Diagram and Parts List for Echo Chainsaw")
_WW_3.gif "Carburetor Diagram and Parts List for Echo Chainsaw")
_WW_4.gif "Clutch Sprocket Diagram and Parts List for Echo Chainsaw")
_WW_5.gif "Cylinder Crankcase Piston Diagram and Parts List for Echo Chainsaw")
_WW_7.gif "Starter Magneto Diagram and Parts List for Echo Chainsaw")
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 19 mins and your part ships today!
$7.72
This is a bevel gear, also referred to as a drive gear or tension gear, and is used in chainsaws. This authentically sourced part is sold individually. It is part of the chain tensioning assembly, aid...
In Stock
Order within the next 19 mins and your part ships today!
$4.99
This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guar...
In Stock
Order within the next 19 mins and your part ships today!
$7.72
This is a single bevel gear for a chainsaw. Your chainsaw has two bevel gears that allow you to adjust the chain tension. One has a post with a slot in it (for a screwdriver), which mates to a second ...
In Stock
Order within the next 19 mins and your part ships today!
$4.99
This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it ca...
In Stock
Order within the next 19 mins and your part ships today!
$4.99
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
Order within the next 19 mins and your part ships today!
$4.99
This is an OEM quality chain tensioner for a chainsaw. This part is attached to the adjustment screw and fits into an opening on the bar. When you turn the adjuster it moves the tensioner, which eithe...
In Stock
Order within the next 19 mins and your part ships today!
In Stock
Order within the next 19 mins and your part ships today!
In Stock
Order within the next 19 mins and your part ships today!
In Stock
Order within the next 19 mins and your part ships today!
In Stock
Order within the next 19 mins and your part ships today!
In Stock
Order within the next 19 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sam from GAITHERSBURG, MD
- Parts Used:
- V651000001, V355000140, V203000041, V651000011, C309000030, 90025304012
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
worn out paddles and scrapper blade
I followed the instructions on Youtube, but I used an Impact drill and ratchet set. The hardest part is assembling the screw on the lower part of the paddle. It helps if you have your snow blower against a wall or something else so that it can not move b/c you will need some strength to push the screw threw the pre-drilled hole to the 10
... Read more
mm nut. I used a vise grip to hold the nut do to the lack of space and with my impact driver started to thread the screw to the nut. This part took about 1 min on one side and 10 minutes on the other side. I guess I got lucky the first time. Changing the scraper blade took about 4 minutes start to finish. It will help if you have needle nose pliers to remove and reattach the spring on each side. The instruction on you tube were very helpful. Hope you find this information helpful.
Read less
Was this instruction helpful to you?
Thank you for voting!