Models
>
967085001
967085001 Craftsman Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$12.41
If your engine is having trouble starting, you may be in need a new purge bulb. When the engine has been sitting for a while, unused, the fuel will drain and eventually dissolve out of the carburetor....
In Stock
Order now and your part arrives by Mar 29
$12.41
This part includes one primer bulb, also known as a purge bulb. This high-quality replacement part is sourced right from the original manufacturer. When the engine of your equipment has been left unus...
In Stock
Order now and your part arrives by Mar 29
$9.32
By replacing your spark plug as part of your regular maintenance, this ensures a better performing engine, cleaner exhaust, faster starting, and a smooth-running engine. This spark plug is sourced dir...
In Stock
Order now and your part arrives by Mar 29
$27.99
This is an authentic OEM sourced part which is specially made for Craftsman chainsaws. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving sha...
In Stock
Order now and your part arrives by Mar 29
$6.51
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacemen...
In Stock
Order now and your part arrives by Mar 29
$7.76
This is a washer kit for a chainsaw. This kit includes the retaining washer, C-ring, and the washer that is located between the clutch and clutch drum assembly. The outer washer acts like a shoulder t...
In Stock
Order now and your part arrives by Mar 29
$7.76
This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durab...
In Stock
Order now and your part arrives by Mar 29
$18.66
This is a Genuine OEM replacement part used on Poulan Gas Chainsaws. This item is made out of Metal and it is Sold Individually. A centrifugal clutch is a part that uses centrifugal force to connect t...
In Stock
Order now and your part arrives by Mar 29
$31.10
This is an OEM part sourced directly from the manufacturer. The chain brake kit is designed for use in Craftsman chainsaws. This part is made of metal and high-quality plastic, and is used to halt th...
In Stock
Order now and your part arrives by Mar 29
$29.98
This is an authentic Poulan replacement chain designed for use with chainsaws. It is a key component of a chainsaw which mechanically cuts the material. Over time the chain will stretch, become dull o...
In Stock
Order now and your part arrives by Mar 29
$6.51
This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is a standard hardware which has multiple applications based on your equipment. Please refer to diagrams of...
In Stock
Order now and your part arrives by Mar 29
$6.51
This is a genuine OEM sourced replacement part designed for use with Poulan chainsaws. It is used to attach the cylinder shield to the main body of the chainsaw. This screw is made out of metal and it...
In Stock
Order now and your part arrives by Mar 29
$7.77
This is a genuine replacement part manufactured for use with chain saws from Craftsman. This part secures the bar to the clutch. It is recommended to review your models diagram to verify the parts com...
In Stock
Order now and your part arrives by Mar 29
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn out oil pump/burning chains
After checking several different videos, ordered the repair parts and two specialty tools( Clutch removal/install and a worm drive remover/installer) Total for parts and tools around 45.00. Much cheaper than the shop wanted, 85.00 to look at it plus parts. As for results I've used the chainsaw all afternoon no problem. Runs like it did 12
... Read more
yrs ago. Pumps oil the would make Jed Clampet proud
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marvin from KIRBYVILLE, TX
- Parts Used:
- 545160401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
My neighbor brought the saw to me. It was locked up
He didn't want to spend alot of money on it. So I got the jug (Head) off and sanded it and the piston down while I waited on the new piston ring to get here. I found that it was easier putting the new ring in and the piston back into the jug (Head) was to go ahead and take the piston out so you could turn the jug (Head) upside down and it
... Read more
slid right in. It didn't take no time at all. And it now runs as good as new
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danny from STEVENSON, WA
- Parts Used:
- 545160401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
I broke the original ring
Took chainsaw apart and replaced the ring.
Was this instruction helpful to you?
Thank you for voting!