Models > 1162150180

1162150180 Kenmore Canister Vacuum

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 1162150180

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This switch is for the oven light and downdraft fan.
No Longer Available
This screw is sold individually.
In Stock
Sold individually.
No Longer Available
Special Order
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Peter from Media, PA
Parts Used:
31986601B
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Both fan and light switches were broken.
TURN OFF POWER TO RANGE AT FUSE BOX -- a)Open the oven door, b) Unscrew the left and right silver nuts (not the black screws)that are in the oven under the control panel, c)pull off the four control knobs on the control panel, d) gently tilt out the control panel, e) set the control panel in/on the protruding arms, f) pull off THE connect ors at the back of the switches - remember which is top and bottom, g) use a screw drive to break off the plastic pieces that hold the switches in place, h) push out the old switches, i) push/snap in the new switches, j) reconnect wires, replace control panel and screw in the nuts.
18 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
don from gardner, KS
Parts Used:
31986601B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
switch was broken
simple repair 4 nut screws easy
Was this instruction helpful to you?
Thank you for voting!