C300 - Parts

This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, a...

This is a tube seal used with various power tools. The seal prevents air from leaking out of your equipment. It is placed on the outlet tube, and connected to the head of the compressor. Note that thi...

The Fuel Tank is an OEM replacement part. It is compatible with the models shown below. It includes the fuel lines, fuel cap and fuel filter. If you need to order the fuel tank bumpers, they are so...

This is a spool retainer for your trimmer. You may also know this part as a bump knob. It is a right-hand thread screw to remove and attach to your trimmer head. Inside the spool housing, it holds the...

This is a genuine OEM replacement grease filter for downdraft exhaust ranges and cooktops. The filter is used to trap grease and particles that result from cooking and will need to be replaced once th...

This high-quality OEM metal hose clamp is a part found in air compressors, and is sold individually. This part can be used on multiple parts on the air compressor, so the exact location, and repair ma...

This bumper fits various gardening tools and is sold individually. The bumper secures the fuel tank and minimizes movement of tank. For installation instructions, refer to the manual provided by the manufacturer.

This burner control knob lets you adjust heat settings on your range or cooktop. It features a D-shaped shaft, black finish with chrome trim, and clear temperature markings. A reliable replacement for...

This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor t...

This spring or container fits gardening tools such as a trimmer. The spring works to recoil a starter rope. If your spring has been worn out, it can lose tension and even break. If the spring breaks, ...

This is a manufacturer-approved head gasket for an air compressor, sold individually. It is designed to seal the valve plate to the cylinder head. If this gasket is damaged or worn, this can create an...