Models
>
C-250
C-250 Shindaiwa Brush Cutter
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for C-250
Viewing 16 of 16
Keep searches simple, eg. "belt" or "pump".
$11.90
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
Order now and your part arrives by Apr 23
$6.51
This part includes one OEM eyelet for a trimmer. Please note that your spool housing will have two of these eyelets, so please order the amount required. The eyelet is in the main housing for the spoo...
In Stock
Order now and your part arrives by Apr 23
$6.51
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is an OEM sourced replacement part used on Shindaiwa trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open th...
In Stock
Order now and your part arrives by Apr 23
$6.51
This clip fits lawn and gardening tools. The clip secures the fuel filter to the fuel line on the unit. *Please note: the clip is sold separately. Refer to the manual provided by the manufacturer for ...
In Stock
Order now and your part arrives by Apr 23
$6.51
This gasket fits lawn and garden equipment. It provides a seal for the gas cap. With use, the seal can wear off and become compressed. In this case, it is best to replace the gasket. *Please note: thi...
In Stock
Order now and your part arrives by Apr 23
$8.56
This is a breather for your lawn equipment. The breather allows air to enter the fuel tank, but will not let the fuel or emissions escape. It is essentially a valve for your tank. This part is connect...
In Stock
Order now and your part arrives by Apr 23
$6.51
This replacement fuel cap assembly is a genuine Shindaiwa part. It is sourced directly from original manufacturer for use with handheld gas powered trimmers/edgers. Its purpose is to keep the fuel in ...
In Stock
Order now and your part arrives by Apr 23
$6.66
This authentic part is designed for Shindaiwa handheld trimmers. It is supplied directly from the original equipment manufacturer. The button is pressed on the ground to extend the cutting line from t...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced thr...
In Stock
Order now and your part arrives by Apr 23
$6.51
This washer is available as an individual replacement part. It is used in various lawn and garden tools made by Echo and Shindaiwa. The washer attaches to the cylinder cover with a screw. It is made o...
In Stock
Order now and your part arrives by Apr 23
$31.34
This replacement primer bulb is a genuine OEM sourced item. It is specially designed for Shindaiwa handheld gas powered trimmers and edgers. By pressing on the purge bulb, it will force fuel into the ...
In Stock
Order now and your part arrives by Apr 23
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
March 1, 2023
This is an old brush cutter i am not getting a spark. I guess i need a new coil. Is one available?
For model number C-250
Hi David, thank you for the question. First, you will need to check the spark plug, part number FIX9314513, it may be fouled or improperly gaped, clean it and re-gap the plug to 0.24 inches then restart, if it is damaged internally you will need to replace it. If this does not help then you will need to replace the coil assembly, part number FIX9180218. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Keith from NORWOOD, NJ
- Parts Used:
- A369000460
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Was this instruction helpful to you?
Thank you for voting!