RY28060 Ryobi Brush Cutter - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- edward from ALLEN, TX
- Parts Used:
- 308054043
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
didn't keep running
removed outer cover, remove old gas lines from carburetor and gas tank. Unscrewed (2) screws holding carburetor. Making certain not to damage gasket under carburetor then installed carburetor using same gasket and screws that held it before. Tightened to snug fit. Installed new gas lines, and cover over carburetor.
Was this instruction helpful to you?
Thank you for voting!