Models > 236R

236R (20200400001-Current) Husqvarna Brush Cutter

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 236R

Viewing 19 of 19
Accessories Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Accessories
Accessories 2 Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Accessories 2
Carburetor And Air Filter Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Carburetor And Air Filter
Chassis And Enclosures Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Chassis And Enclosures
Crankcase Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Crankcase
Crankshaft Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Crankshaft
Cylinder Piston Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Cylinder Piston
Decals Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Decals
Electrical Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Electrical
Fuel Tank Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Fuel Tank
Gears Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Gears
Handle Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Handle
Muffler Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Muffler
Seat Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Seat
Seat 2 Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Seat 2
Starter Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Starter
Throttle Controls Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Throttle Controls
Tube And Shaft Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Tube And Shaft
Wheels And Tires Diagram and Parts List for 20200400001-Current Husqvarna Brush Cutter
Wheels And Tires
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
$6.84
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missi...
In Stock
Order now and your part arrives by Jun 4
Lawn Tractor Mandrel Assembly – Part Number: 587819701
$73.55
In Stock
Order now and your part arrives by Jun 4
Lawn Mower Flange Wheel Bearing – Part Number: 532009040
$12.06
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually...
In Stock
Order now and your part arrives by Jun 4
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
$6.84
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is ...
In Stock
Order now and your part arrives by Jun 4
Lawn Mower Washer – Part Number: 532121749
$6.84
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
Order now and your part arrives by Jun 4
Bolt and Washer Assembly – Part Number: 532193003
$13.67
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If ...
In Stock
Order now and your part arrives by Jun 4
Chainsaw Fuel Filter – Part Number: 591375401
$14.67
Located inside the fuel tank, the fuel filter removes debris before it can reach the carburetor. If your small engine starts with difficulty or idles rough, it may be clogged, restricting the flow of ...
In Stock
Order now and your part arrives by Jun 4
Lawn Mower High Lift Blade – Part Number: 532138971
$27.14
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
In Stock
Order now and your part arrives by Jun 4
Lawn Mower Flangelock Hex Nut – Part Number: 532409149
$6.84
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
Order now and your part arrives by Jun 4
Lawn Mower Mandrel Spacer Washer – Part Number: 532187690
$7.52
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
Order now and your part arrives by Jun 4
Mandrel Ball Bearing – Part Number: 532110485
$19.59
This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of t...
In Stock
Order now and your part arrives by Jun 4
Mandrel Pulley Assembly – Part Number: 532195945
$19.59
This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, h...
In Stock
Order now and your part arrives by Jun 4
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 236R

Viewing 2 of 2
Drive system does not work
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Mandrel Ball Bearing

Replacing the Mandrel Ball Bearing

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Trace from LISLE, IL
Parts Used:
532138971
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact drive r, ..... and you know the rest.
Read less
17 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from PILESGROVE, NJ
Parts Used:
532123583
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Hickory, NC
Parts Used:
532177968
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
4 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More