KSB3AC0 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Susan from Gig Harbour, WA
- Parts Used:
- WP9709707
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
After sitting on my kitchen counter for nearly 42 years the rubber feet left foot prints.
We:
tipped the mixer over on its side
pulled the old feet off
put the new feet in place and pounded them w/our fists
set it back up on its new feet
smiled
tipped the mixer over on its side
pulled the old feet off
put the new feet in place and pounded them w/our fists
set it back up on its new feet
smiled
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly from Post Falls, ID
- Parts Used:
- WP9709707
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The 5 feet on my Kitchen Aide, had worn out
Took the old feet (5) off and put new on the Kitchen Aide, looks great. Stands high and your assistance on the phone, was so appreciated.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from CARLISLE, PA
- Parts Used:
- WP9709707
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Missing pedestal foot
Turned the mixer on its side and slid the part into the bottom of the base.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Claudia from Banning, CA
- Parts Used:
- 9701672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old seal was worn and stained.
Removed old seal; tucked new seal into place. Took seconds. What impressed me was how easy it was to order and how quickly it arrived. PartSelect.com is now my "go to" for future parts needs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GREGORY from FRISCO, TX
- Parts Used:
- 9701672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing lid seal
We ordered a seal for the lid of our KitxhenAid Blender .
It was shipped in one day and we got it the next day.
Perfect service!
It was shipped in one day and we got it the next day.
Perfect service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- edward from eau claire, WI
- Parts Used:
- 9701672
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
seal failure - it broke
First I removed the new seal from its packaging. Then I placed it on the interior lid perimeter, carefully tucking the outer seal edge under the restraining tabs. It was a perfect fit. To celebrate, I made margaritas.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Manheim, PA
- Parts Used:
- WP9709707
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Lost a rubber foot on my Kitchen Aid mixer. The remaining feet we're hard and mushroomed. I decided to replace all 5. That was the correct decision.
I griped each foot with a pliers and twisted it out of its setting. I then set a new foot in place and hammered it into place with a small hammer. The feet fit snugly and did not need to be glued. Job was easy and mixer sits like new. I was glad I spent the money to replace all of the feet at once.
Was this instruction helpful to you?
Thank you for voting!