Models > 82310

82310 (Type 1) Black and Decker Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 82310

Viewing 1 of 1
Page A Diagram and Parts List for Type 1 Black and Decker Trimmer
Page A
Keep searches simple, eg. "belt" or "pump".
Bump Cap – Part Number: 682378-02
$10.57
2-5/8-Inch Wide This is a genuine Black and Decker replacement part. It is sold individually.. Its purpose is to hold the spool and bumper in the spool housing. It has 2 tabs that snap into th...
In Stock
Order within the next 11 hrs and your part ships today!
Spool – Part Number: 143684-01
$14.86
This part includes one OEM spool replacement for a trimmer. This spool includes 20-feet of factory-wound 0.65-inch line. The spool houses the cutting line and is located inside the cutting head to cut...
In Stock
Order within the next 11 hrs and your part ships today!
Spring – Part Number: 682235-00
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Plastite Screw – Part Number: 330019-04
$4.99
This is a plastite screw for a variety of power tools. It is almost an inch long with a pan head. A plastite screw is needed when using harder plastics. It is more resistant to stripping and pulling out.
In Stock
Order within the next 11 hrs and your part ships today!
Switch,On/Off – Part Number: 383994-00
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Terminal – Part Number: 825209-00
No Longer Available
Contact,Term. – Part Number: 87486-00
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Fan – Part Number: 833912-01
Fan
$18.44
In Stock
Order within the next 11 hrs and your part ships today!
Nut,Hex – Part Number: 330015-02
$4.99
Special Order
Nut,Hex – Part Number: 330015-04
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Washer,Shim – Part Number: 854978-00
No Longer Available
Receptacle – Part Number: 51350-04
$3.99
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Curtis from Huntsville, AL
Parts Used:
87486-00
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More