Models
>
BD4600
BD4600 Ryobi Belt or Drum Sander
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for BD4600
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
$8.60
This is a drive belt for a sander. It is what drives the sanding belt. The belt can wear over the years and will require replacement. It usually shows its wear in the form of cracks, fraying or breaka...
In Stock
On Order
In Stock
In Stock
In Stock
Special Order
In Stock
In Stock
On Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Al
June 6, 2023
The drive drum for the belt drifts up against the non belt side of the housing causing unit to bind and stop. How do you adjust or what part may be worn?
For model number BD4600
Hi Al, thank you for writing in. If the sanding belt moves toward the disc, turn the trackingknob clockwise 1/4 turn. If the sanding belt moves away from the disc, turn the tracking knob counterclockwise 1/4 turn. We hope this answered your question.
Was this helpful?
Thank you for voting!