Models > EA-410 > Instructions

EA-410 (E01904001001 - E01904999999) Echo Auger - Instructions

Jump to:

All Instructions for the EA-410
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from NORWOOD, NJ
Parts Used:
A369000460
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
19 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from SPRING HILL, FL
Parts Used:
12318139130
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EA-410
1 - 2 of 2