Models
>
9524NB
9524NB Makita Angle Grinder
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 9524NB
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
This part includes two carbon brushes with wire leads and brush springs. Worn brushes are typically presented as a failed or underperforming motor. Carbon brushes are a part that commonly wears, so it...
In Stock
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the ...
In Stock
In Stock
In Stock
$4.99
This is a self-tapping screw, and it is found on multiple power tools and lawn equipment. This screw is different because it can tap its own hole into tough materials, such as metals and hard plastics...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stuart
October 4, 2022
I have looked at the exploded diagrams and took apart my grinder but i am struggling to find out how you take off the Makita spiral beval gear 36 9523nb/9* 226728 4. I am looking to replace the bearing underneath. There are two bearings listed for this :
Ball bearing 6201zz uc3530a 211107 9
ball bearing 6201ddw bpj141/81 211129 9
any idea which one would fit my machine?
any help would be much appreciated on these two questions.
thanks
stuart tawn
For model number 9524NB
Hi Stuart, thank you for contacting us. We have attached videos for the installation of your part. It may not be the exact same module but it should install almost the same. We hope this helps!
Was this helpful?
Thank you for voting!
Additional Links: