Models
>
9523NBH
9523NBH Makita Angle Grinder
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 9523NBH
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This part includes two carbon brushes with wire leads and brush springs. Worn brushes are typically presented as a failed or underperforming motor. Carbon brushes are a part that commonly wears, so it...
In Stock
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the ...
In Stock
In Stock
$4.99
This is a self-tapping screw, and it is found on multiple power tools and lawn equipment. This screw is different because it can tap its own hole into tough materials, such as metals and hard plastics...
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
December 21, 2021
In order to remove the stator. I have to disconnect the two wires from the brush holders. How do remove the brush holders or disconnect and reconnect the two wires that go on the brush holders???
For model number 9523NBH
Hello Mark, Thank you for your inquiry. We have provided a link to our repair video for replacing the brush holder on a Makita grinder to give you a general idea of the repair. We hope this helps.
Was this helpful?
Thank you for voting!
Mark
February 15, 2022
I have replaced the field coils as it look melted but pass the ohm's test . The armature passed all three ohm's tests i have reassembled the grinder. It still wants to burn the field coils as it get hot and starts to smoke. I believe the armature most likely bad but passes all the tests. What is the next step? Any advice
Thanks,
Mark cell 224 616 8611
For model number 9523NBH
Hi Mark,
Thank you for your question. If your grinder is overheating and you have replaced the field coils and checked the armature, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the carbon brushes, the bearings, the gears, the fan and the holders. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
