Models
>
AQC1513TEW03
AQC1513TEW03 Amana Freezer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AQC1513TEW03
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$21.82
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
$173.35
This door gasket forms a tight seal to keep heat or cold contained while preventing air and moisture leaks. A proper seal improves efficiency and helps maintain consistent internal conditions. Replaci...
In Stock
Order now and your part arrives by Jul 23
This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.
In Stock
Order now and your part arrives by Jul 23
$74.30
This part provides added protection for the compressor motor because it protects against excessive current and excessive temperature use.
Special Order
$408.05
This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repa...
In Stock
Order now and your part arrives by Jul 23
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
No Longer Available
Special Order
$45.00
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Jul 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Henry from Monrovia, CA
- Parts Used:
- W10917237
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
pulled switch from door ,unpluged it and then plued in new switch.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- richard from galena, KS
- Parts Used:
- WP2214067
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Overload was open
New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Was this instruction helpful to you?
Thank you for voting!