Models
>
CIC-4H-P76213-6W
CIC-4H-P76213-6W Amana Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CIC-4H-P76213-6W
Viewing 13 of 13Keep searches simple, eg. "belt" or "pump".
$11.98
This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the o...
On Order
In Stock
Order now and your part arrives by Aug 11
$7.60
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
In Stock
Order now and your part arrives by Aug 11
Please Note: This part has been updated by the manufacturer and includes the ice maker and flat plug connector only. It does not include the cover, ice level arm or the wire harness. You can reuse tho...
No Longer Available
Special Order
In Stock
Order now and your part arrives by Aug 11
Special Order
In Stock
Order now and your part arrives by Aug 11
Common Problems and Symptoms for CIC-4H-P76213-6W
Viewing 2 of 2Leaking
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jeff from Harleysville, PA
- Parts Used:
- 1110702A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice Maker was broken
First I unplugged the refrigerator. Then I disconnected the flat plug. Then I loosened two screws and removed the origional ice maker. After the old ice maker was out I reversed the process and installed the new ice maker. The instructions said that it could take up to 24 to 48 hours before you have your first batch of ice. Two hours
... Read more
after the installation I had my first cycle of ice. One of the easiest repairs I have ever done!
Thank you.
Thank you.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lee from Fayetteville, PA
- Parts Used:
- 1110702A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
ice maker quit working
first unscrewed the 3 hex head screws. The problem that delayed everythhing for a few days ways that the wiring harness would not come loose from the side of the freezer. I called our service man and he was kind enough to tell me to disconnect the wiring harness from the ice maker instead of the freezer. With that knowledge , the repla
... Read more
cement went quickly. I would suggest that you include that info on your site. Unplug the wiring harness from the icemaker and not the freezer.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Brighton, MI
- Parts Used:
- 1110702A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Ice maker quit making ice. I believe the motor was tired after 20 years.
First I removed the ice catcher bucket to give myself a little room and lifed the ice maker lever to make sure it wouldn't try to produce ice while I was replacing it.
I removed the bottom screw and loosened the top two with a nut driver. The ice maker lifted right out and allowed me to disconnect the electrical plug; just sque ... Read more eze the little plastic levers on both sides of the plug and pull.
I plugged in the electrical connection from the new ice maker. Making sure the water spout was in place, I dropped the new unit over the two loosened top screws. I then replaced the bottom screw and tightened all three. I replaced the ice catcher bucket and made myself a martini as a reward for not spending the $75.00 to $100.00 for a service call.
Within a couple of hours it was again making batches of ice for more martinis; it was a day or so before there was enough for frozen Margueritas.
I never even unplugged the refrigerator or shut off the water supply, although I suppose it would be prudent but not necessary. Some people like me just like to tempt fate.
The repair was so quick I didn't even worry about emptying the freezer. It was so easy even a girl could do it ... no offense intended. At the equivalent of $300.00 to $400.00 per hour I wish I could do it all day. Maybe I should be a "refrigerator repairman".
Seriously, the only thing that could hamper you is a lack of confidence which will quickly be overcome in 10 to 15 minutes by a huge ego. That time frame includes locating the tools and taking a few deep breaths. Don't hesitate to give it a shot. If you can't do it you really don't deserve to have ice. It really is that simple and easy.
I removed the bottom screw and loosened the top two with a nut driver. The ice maker lifted right out and allowed me to disconnect the electrical plug; just sque ... Read more eze the little plastic levers on both sides of the plug and pull.
I plugged in the electrical connection from the new ice maker. Making sure the water spout was in place, I dropped the new unit over the two loosened top screws. I then replaced the bottom screw and tightened all three. I replaced the ice catcher bucket and made myself a martini as a reward for not spending the $75.00 to $100.00 for a service call.
Within a couple of hours it was again making batches of ice for more martinis; it was a day or so before there was enough for frozen Margueritas.
I never even unplugged the refrigerator or shut off the water supply, although I suppose it would be prudent but not necessary. Some people like me just like to tempt fate.
The repair was so quick I didn't even worry about emptying the freezer. It was so easy even a girl could do it ... no offense intended. At the equivalent of $300.00 to $400.00 per hour I wish I could do it all day. Maybe I should be a "refrigerator repairman".
Seriously, the only thing that could hamper you is a lack of confidence which will quickly be overcome in 10 to 15 minutes by a huge ego. That time frame includes locating the tools and taking a few deep breaths. Don't hesitate to give it a shot. If you can't do it you really don't deserve to have ice. It really is that simple and easy.
Read less
Was this instruction helpful to you?
Thank you for voting!