Models
>
RE183G0
RE183G0 Whirlpool Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RE183G0
Viewing 5 of 5
Manuals & Guides for RE183G0
Click to downloadKeep searches simple, eg. "belt" or "pump".
$7.95
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
In Stock
In Stock
In Stock
$5.42
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
In Stock
Special Order
This is a high temperature adhesive that is used for gaskets and felt seals.
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RE183G0
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The cooling selector switch stopped working
First removed the power and front panel. Then in order to get to the damaged cooling selector switch, I needed to first drill out three riviets holding the small front pannel that the switch and thermostat selector switches are mounted on.
Then it was a simple matter to unscrew two small screws holding the broken cooling selec ... Read more tor switch in place.
At this point, I unhooked each wire (about 7 of them) from their terminal connector on the back of the switch, and reapplied each to the new switch. After I was done I then mounted the new switch with the two screws and realigned the pannel.
The only thing remaining was to install the small pannel using three pop rivets and slide on a new knob, and reinstall the large A/C front cover.
FYI, The new replacement switch and knob were perfectly identical, and worked like a charm.
Then it was a simple matter to unscrew two small screws holding the broken cooling selec ... Read more tor switch in place.
At this point, I unhooked each wire (about 7 of them) from their terminal connector on the back of the switch, and reapplied each to the new switch. After I was done I then mounted the new switch with the two screws and realigned the pannel.
The only thing remaining was to install the small pannel using three pop rivets and slide on a new knob, and reinstall the large A/C front cover.
FYI, The new replacement switch and knob were perfectly identical, and worked like a charm.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SHIRLEY G. from Mabank, TX
- Parts Used:
- WP1182336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter was filthy, no telling how long it had been since changed
Took out old filter and replaced it with the new filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tina from Decherd, TN
- Parts Used:
- 1183511
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Thermostat was shorting out
First remove two screw pulledout 3 inches diconneccected 3 wire and put back.
Was this instruction helpful to you?
Thank you for voting!