CA29WC00 Whirlpool Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- SHIRLEY G. from Mabank, TX
- Parts Used:
- WP1182336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter was filthy, no telling how long it had been since changed
Took out old filter and replaced it with the new filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rhea from Plainview, TX
- Parts Used:
- WP1182336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter had become brittle & needed replacing
Just removed the old filter and replaced. Slid right in, no tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Liberty, MS
- Parts Used:
- WP1182336
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench (Adjustable)
Needed new Ice Maker
Removed back cover, and installed the water valve. Removed the water supply tube cover and installed the supply tube. Opened freezer and removed the electrical cover, removed the knockouts and pulled line out. Hooked up ice maker and installed it to wall. Turned water on and waited a couple hours, it is making ice. Installing the ice maker was easy. Running water line to it........well that is another story. LOL.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- susan from Socorro, NM
- Parts Used:
- WPY015825
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Both motor clips broken - >40 year old dryer!!
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan J from Oneonta, NY
- Parts Used:
- WP8031121
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no on/off knob
even I can replace a control knob....
Was this instruction helpful to you?
Thank you for voting!