ACM082XP0 Whirlpool Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Frank from Prince Frederick, MD
- Parts Used:
- 8031115
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Erratic cycling of the compressor.
Received the thermost from you in 2 days. (fast and reasonable shipping)
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Westwood, MA
- Parts Used:
- WP1187170
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Seized motor
Disassembled air conditioner, Removed motor and wiring. Remove wheel and blade. Remove motor from condenser coil housing. Install motor and reassemble after wiring.
Was this instruction helpful to you?
Thank you for voting!