AR0600XX0 Whirlpool Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Burton, OH
- Parts Used:
- 950521
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
switch shaft was broken.
ordered new part, removed old unit, noted where wires connect, installed new one, done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dena from Coral Gables, FL
- Parts Used:
- 950521
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
screw holes didn't line up
I received the part the very next day which was awesome, but when I went to install it, there was a connection discrepency on the back of the switch, and the screw holes were completely off in the front where it connects to the unit. I ended up taking the whole thing apart to try to put the old face with the right screw holes on the new part and ruined it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from BLOOMFIELD, NM
- Parts Used:
- WP1158639
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken control knobs
I opened the package. I tool out the plastic bag containing the replacement knobs. (I ordered two). I lined up the knob that needed replacing and pushed it on. The replacement knobs are of a better quality than the original and shouldn't break like the old ones. After this repair I was exhausted and took a nap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alice from VIENNA, MD
- Parts Used:
- WP1158639
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace missing temperature control knob
control switch for GE air conditioner fit my ancient Whirlpool 10K BTU air conditioner - slip on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RICHARD from SAN ANTONIO, TX
- Parts Used:
- 485760
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
No Control Of Temp.
The part was easy to remove and replace. Instructions were easy to understand. Once removed and replaced. The a/c worked great. I could control the temp and not be freezing all the time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from Fall River, MA
- Parts Used:
- WP1158639
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Knob was very difficult to attach. It fits very tight.
Had to get someone else to attach knob
Was this instruction helpful to you?
Thank you for voting!