Models > ACE082XP2 > Instructions

ACE082XP2 Whirlpool Air Conditioner - Instructions

Jump to:

All Instructions for the ACE082XP2
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dr H L from KIMBERLING CY, MO
Parts Used:
WP1185753
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
A/C cooling but not cycling.
Unpluged unit from receptacle. Simply slid the unit forward a bit (to get to screws after removing face), removed four screws, pulled the wired sensor from front of grill. Reversed & replaced everything, plugged unit back in and turned on - all working well. Easy job.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald W from GRANITE SHLS, TX
Parts Used:
WP1185753
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the old thermostat would not on an off
Removed old thermostat replaced it with a new thermostat.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan J from Oneonta, NY
Parts Used:
WP8031121
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no on/off knob
even I can replace a control knob....
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ACE082XP2
1 - 3 of 3