Models
>
RAD-141A
RAD-141A LG Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RAD-141A
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Mar 20
The installation kit contains the hardware you need to install the room air conditioner.
In Stock
Order now and your part arrives by Mar 20
In Stock
Order now and your part arrives by Mar 20
$8.35
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
Special Order
In Stock
Order now and your part arrives by Mar 20
In Stock
Order now and your part arrives by Mar 20
In Stock
Order now and your part arrives by Mar 20
Special Order
In Stock
Order now and your part arrives by Mar 20
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARLINGEN, TX
- Parts Used:
- 5900A10009B
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Travis from LOUISVILLE, IL
- Parts Used:
- 4960A20005A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from UPPR CHICHSTR, PA
- Parts Used:
- AKB73016015
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Kenmore Air Conditioner Remote Broken
No repair. Just a new remote controller assembly and it works fine.
Was this instruction helpful to you?
Thank you for voting!