Models
>
DCG1218
DCG1218 (ENCXFRD) LG Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DCG1218
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patrick from LITTLEFIELD, AZ
- Parts Used:
- EAD54838701
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Remote control not operating system.
You need to remove grill assemble from cassette.
1. Remove the 4 corner cover (slide horizontal ). Then remove the 4 screw holding the grill in place.
2. Have a helper to hold grill close to the ceiling so you don't have to undo all the wiring.
3. Remove the cover off the main control board.
4. There are screws under ... Read more the weather stripping. remove them this allows you to remove the foam duct insulation.
5. You can now see the PCB ASSEMBLE,DISPLAY. Unclip it and follow the wiring harness which go into the main control board. Unplug and remove.
6. Install the new assemble in a reverse order.
1. Remove the 4 corner cover (slide horizontal ). Then remove the 4 screw holding the grill in place.
2. Have a helper to hold grill close to the ceiling so you don't have to undo all the wiring.
3. Remove the cover off the main control board.
4. There are screws under ... Read more the weather stripping. remove them this allows you to remove the foam duct insulation.
5. You can now see the PCB ASSEMBLE,DISPLAY. Unclip it and follow the wiring harness which go into the main control board. Unplug and remove.
6. Install the new assemble in a reverse order.
Read less
Was this instruction helpful to you?
Thank you for voting!