Models
>
LT1016CER
LT1016CER (AT1AHDS) LG Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for LT1016CER
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$61.55
The condenser fan blade fits onto the air conditioner motor shaft. The fan blade helps circulate air over the condenser to cool the refrigerant before it enters in to the evaporator. This part is beig...
On Order
In Stock
Order now and your part arrives by Mar 27
Special Order
In Stock
Order now and your part arrives by Mar 27
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARLINGEN, TX
- Parts Used:
- 5900A10009B
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from BROOKLYN, NY
- Parts Used:
- 5900A20009A
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Fan Broke
Local authorized LG repair shop told me, don't waste my time fixing it. Bench fix is $300 dollars. Purchased part, watched a video and bam. Fixed in 3-4 hours.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Travis from LOUISVILLE, IL
- Parts Used:
- 4960A20005A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Was this instruction helpful to you?
Thank you for voting!