Models
>
EP12G33B
EP12G33B (AT3AFRD) LG Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for EP12G33B
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$165.35
This is a genuine OEM replacement part from LG. This is a heating element that is commonly used in air conditioners that have a heating function as well. This part of your air conditioner is what heat...
Special Order
$61.55
The condenser fan blade fits onto the air conditioner motor shaft. The fan blade helps circulate air over the condenser to cool the refrigerant before it enters in to the evaporator. This part is beig...
On Order
This main control board assembly is a genuine OEM replacement for select LG room and window air conditioners. Acting as the unit’s central control system, it manages cooling functions, fan speeds, tem...
No Longer Available
On Order
Special Order
$218.32
This AC motor assembly drives key mechanical functions, ensuring smooth and reliable movement. Common symptoms of failure include reduced power, unusual noise, or inconsistent operation. Replacing it ...
In Stock
Order now and your part arrives by Aug 20
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARLINGEN, TX
- Parts Used:
- 5900A10009B
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from GAINESVILLE, TX
- Parts Used:
- EBR76261810
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The a/c compressor would run continuously even when turned off
Unplug the unit next remove the front grill/ filter assembly notice screw on each side and one inside. Lift the bottom out it has clips on each side it takes some effort to remove. Next remove the temperature sensor pull it out from the evaporator. Next remove screws the display control pull it out and remove connecting link to the vent b
... Read more
lades that can be pryed with flat blade screw driver. Next remove screws holding the silver box that contains the pcb assembly pull it out the bottom may have to be pried up and pull over edge. Once the box is out as far as the wires allow open the box by bending it open enough to access the wiring and the pcb assembly. Next take pictures of the inside of the box a lot of pictures it will help you to reconnect all the wires correctly take your time once the replacement is complete reinstall the box back in reverse order then reinstall the grill and filter assembly. Next plug in cord push the on button and unit should work as designed. I hope this helps
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Al from CROSS PLAINS, TX
- Parts Used:
- EAE43285408
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Capacitor went out
Unplugged and replugged everything and it worked very easy job thank you
Was this instruction helpful to you?
Thank you for voting!