25370121012 Kenmore Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Nick from JOPLIN, MO
- Parts Used:
- 5304476057
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Bearings in fan motor were bad causing a loud grinding sound.
Pull the front and outside shell off and the got the Styrofoam off and all necessary screws. Undid the wires and reran everything.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randy from Sumas, WA
- Parts Used:
- 5304476059
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Fan Blade Broken
I took all of the outer screws out and removed sheet metal cover. I had to unbolt fan motor from bottom of the unit. I moved the fan motor so I could remove the Fan Blade. Put new blade on and reversed the process. Works Fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bobby from Monroe, NC
- Parts Used:
- 5304476183
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
No cooling. Sound of compressor not coming on
I took the air conditioner apart. Then, I turn the unit on. The ever-present sound of the compressor was not there. I jumped the compressor relay out, And it came on. I contacted PartSelect With the model number And told them I needed the power control board. Ingested few days I had the board and completed the repair in less than one hour. I rate this company at five star.
Was this instruction helpful to you?
Thank you for voting!