1069721491 Kenmore Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ron from Knob Noster, MO
- Parts Used:
- WP1160325
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Ac Would Cool But Compresser Would Not Cycle On &Off
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from BLOOMFIELD, NM
- Parts Used:
- WP1158639
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken control knobs
I opened the package. I tool out the plastic bag containing the replacement knobs. (I ordered two). I lined up the knob that needed replacing and pushed it on. The replacement knobs are of a better quality than the original and shouldn't break like the old ones. After this repair I was exhausted and took a nap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alice from VIENNA, MD
- Parts Used:
- WP1158639
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace missing temperature control knob
control switch for GE air conditioner fit my ancient Whirlpool 10K BTU air conditioner - slip on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Travis from Locust Grove, GA
- Parts Used:
- WP1160325
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
A/C coils would freeze up and unit would not shut off with temperature control.
Unplugged unit.
Pulled front cover and removed switch knobs.
Pulled switch plate off and replaced thermostat switch and temperature sensor bulb assembly.
Reassembled and plugged in.
Unit works normal.
Pulled front cover and removed switch knobs.
Pulled switch plate off and replaced thermostat switch and temperature sensor bulb assembly.
Reassembled and plugged in.
Unit works normal.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- susan from Socorro, NM
- Parts Used:
- WPY015825
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Both motor clips broken - >40 year old dryer!!
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Guessed that the parts were motor clips (no pix in the web site!)
Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!
(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from Fall River, MA
- Parts Used:
- WP1158639
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Knob was very difficult to attach. It fits very tight.
Had to get someone else to attach knob
Was this instruction helpful to you?
Thank you for voting!