Models
>
AZ61H09DABW1
AZ61H09DABW1 General Electric Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AZ61H09DABW1
Viewing 5 of 5Manuals & Guides for AZ61H09DABW1
Click to downloadInstall
Installation Instructions
(2.17MB)
Manual
Owner's Manuals
(17.81MB)
Manual
Owner's Manuals
(6.09MB)
Manual
Owner's Manuals
(1.87MB)
Specs
Product Specifications Sheet
(0.07MB)
Keep searches simple, eg. "belt" or "pump".
$30.33
This genuine OEM part is a replacement air filter for your air conditioner. The air filter is used to trap particles like dust and debris and prevent them from entering your home. The filter should be...
In Stock
In Stock
In Stock
In Stock
Special Order
Special Order
Special Order
On Order
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Vern from Charlestown, IN
- Parts Used:
- WP85X10008
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Air filters needed to be replaced.
Take the old filters out and install new filters.Took less than 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from SAINT CHARLES, MO
- Parts Used:
- WP76X10033
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Shroud broke
Step 1: un-plug unit and remove front cover
Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people)
Step 3: remove screws holding the shroud and the bracket for the fan
Step 5: remove screw holding fan blade from motor
Step 6: ... Read more install new shroud and screw that holds the shroud to bracket
Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall
Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people)
Step 3: remove screws holding the shroud and the bracket for the fan
Step 5: remove screw holding fan blade from motor
Step 6: ... Read more install new shroud and screw that holds the shroud to bracket
Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall
Read less
Was this instruction helpful to you?
Thank you for voting!