AJES12DCM1 General Electric Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- HERBERT from WOODCLIFF LAKE, NJ
- Parts Used:
- WJ73X10037
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
vibration, one fan blade broken off
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from San Jose, CA
- Parts Used:
- WJ35X10142
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Power Cord Replacement
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nelson from Jersey City, NJ
- Parts Used:
- WJ73X10037
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
blade broken
order a new fan blade and replaced it
Was this instruction helpful to you?
Thank you for voting!