Models
>
AGT05LHG1
AGT05LHG1 General Electric Air Conditioner
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for AGT05LHG1
Viewing 1 of 1
Manuals & Guides for AGT05LHG1
Click to downloadKeep searches simple, eg. "belt" or "pump".
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Riverwoods, IL
- Parts Used:
- WJ26X10209, WJ26X10208
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
on-off switch defective - stuck in on position
I removed the filter and then the two screws that held the outside cover of the air conditioner. I slid the cover off and pried the defective switch out of the panel. I exchanged the wires to the new switch and pushed the new switch into the panel with my fingers. I then replaced the cover and the air conditioner works fine.
Was this instruction helpful to you?
Thank you for voting!