Models > AJHS08DCM1

AJHS08DCM1 General Electric Air Conditioner

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for AJHS08DCM1

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$131.11
In Stock
This knob accepts a D-shaped shaft.
In Stock
This slide -in air filter is a genuine OEM replacement part for your air conditioner. The air filter helps eliminate dirt and dust from re-circulating through the air when running your air conditioner...
No Longer Available
No Longer Available
Special Order
Sold individually. This part works in conjunction with the fan motor.
In Stock
Also known as Blower Wheel.
No Longer Available
In Stock
In Stock
$181.23
Special Order
No Longer Available
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for AJHS08DCM1

Viewing 1 of 1
Noisy
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
HERBERT from WOODCLIFF LAKE, NJ
Parts Used:
WJ73X10037
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
vibration, one fan blade broken off
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from San Jose, CA
Parts Used:
WJ35X10142
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Power Cord Replacement
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on termi nals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nelson from Jersey City, NJ
Parts Used:
WJ73X10037
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
blade broken
order a new fan blade and replaced it
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!