CRA126CT10 Frigidaire Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Nick from JOPLIN, MO
- Parts Used:
- 5304476057
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Bearings in fan motor were bad causing a loud grinding sound.
Pull the front and outside shell off and the got the Styrofoam off and all necessary screws. Undid the wires and reran everything.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Denis from VERMILION, OH
- Parts Used:
- 5304476793
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
Needed to replace front panel on Electrolux A/C - New Part Doesn't Fit
Purchased part number 5304476793. Part was not the right size, so called Electrolux (877-435-3287). After 50 minutes on hold, I was told this IS the correct part.
When I explained that it is 1/2" too tall, and 1 1/2" too narrow, and none of the slots line up, she would only say (again) that it was the correct part, and their drawing was correct.
And left me hanging. No discussion, no mention that maybe the wrong part was in the packing. No options. Thank you for calling. Goodbye.
At least PartsSelect was prompt and courteous, and gave me a refund, since the manufacturer was not at all interested in the issue.
When I explained that it is 1/2" too tall, and 1 1/2" too narrow, and none of the slots line up, she would only say (again) that it was the correct part, and their drawing was correct.
And left me hanging. No discussion, no mention that maybe the wrong part was in the packing. No options. Thank you for calling. Goodbye.
At least PartsSelect was prompt and courteous, and gave me a refund, since the manufacturer was not at all interested in the issue.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randy from Sumas, WA
- Parts Used:
- 5304476059
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Fan Blade Broken
I took all of the outer screws out and removed sheet metal cover. I had to unbolt fan motor from bottom of the unit. I moved the fan motor so I could remove the Fan Blade. Put new blade on and reversed the process. Works Fine.
Was this instruction helpful to you?
Thank you for voting!