CRA106HT110 Frigidaire Air Conditioner - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mary Grace from WOODSIDE, NY
- Parts Used:
- 5304471197
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Power doesn't turn off. Compressor continues to run when control switch is off.
1. Most importantly, unplug the a/c unit from the electric wall socket for safety.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- scott from ISLAND PARK, NY
- Parts Used:
- 5304471197
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The display was flashing 0.5 off and on then it wouldn’t power up
I took the face of the air condition. Off removed the circuit board, cleaned everything down with the alcohol pad. Put it all back together. It seems to work fine. I’m thinking maybe from a heavy rain storm. Rain got inside there.. Nevertheless, I still have the board I purchased I guess I’ll keep it as a spare. Thanks again
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from CRESTVIEW, FL
- Parts Used:
- 5304471276
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Unit condenser won't turn off
Took old part off and replaced after cleaning the coils but it didn't fix it .Now have to figure out what's next.
Was this instruction helpful to you?
Thank you for voting!