CAH18WC00 Crosley Air Conditioner

First removed the power and front panel. Then in order to get to the damaged cooling selector switch, I needed to first drill out three riviets holding the small front pannel that the switch and thermostat selector switches are mounted on.

Then it was a simple matter to unscrew two small screws holding the broken cooling selec ... Read more tor switch in place.

At this point, I unhooked each wire (about 7 of them) from their terminal connector on the back of the switch, and reapplied each to the new switch. After I was done I then mounted the new switch with the two screws and realigned the pannel.

The only thing remaining was to install the small pannel using three pop rivets and slide on a new knob, and reinstall the large A/C front cover.

FYI, The new replacement switch and knob were perfectly identical, and worked like a charm.

Took out old filter and replaced it with the new filter

First remove two screw pulledout 3 inches diconneccected 3 wire and put back.