Models > HMG191772

HMG191772 Admiral Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for HMG191772

Viewing 2 of 2
Compressor Diagram and Parts List for Admiral Refrigerator
Compressor
Compressor Page 2 Diagram and Parts List for Admiral Refrigerator
Compressor Page 2
Keep searches simple, eg. "belt" or "pump".
Refrigerator Condenser Fan Motor Kit – Part Number: 833697
$66.86
This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compresso...
In Stock
Order now and your part arrives by Jun 13
Screw – Part Number: WP488729
$7.60
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Jun 13
Speed Nut – Part Number: WP486692
$9.79
This part measures 1/4-20 inch. Sold individually.
In Stock
Order now and your part arrives by Jun 13
Relay – Part Number: WP10097204
$60.49
Also known as Start Relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Special Order
Screw – Part Number: 61005388
Sold Individually.
No Longer Available
Refrigerator Screw – Part Number: WP489399
$7.60
This screw is sold individually.
In Stock
Order now and your part arrives by Jun 13
Refrigerator Overload – Part Number: WP2183456
$70.05
This part helps protect the motor from overheating.
In Stock
Order now and your part arrives by Jun 13
Refrigerator Screw – Part Number: WP67006715
$9.79
Sold individually.
Special Order
Refrigerator Drier (Service) – Part Number: WPW10143759
$29.98
This is a drier for your refrigerator. You may also know this part as an ultra violet dye drier or a filter drier. It filters the refrigerant that moves through the sealed system. If your fridge/freez...
In Stock
Order now and your part arrives by Jun 13
Refrigerator Bracket Grommet – Part Number: WP61004743
$10.36
Special Order
Defrost Drain Pan – Part Number: 61004095
No Longer Available
Condensor Fan Blade – Part Number: WP12587601
$78.55
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for HMG191772

Viewing 8 of 8
Fridge too warm
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Too warm
Fixed by these parts
Fixing
How to fix it
Replacing the Refrigerator Condenser Fan Motor Kit

Replacing the Refrigerator Condenser Fan Motor Kit

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tom from Franklin, WI
Parts Used:
833697
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Sometimes the condenser fan would start causing the refrigerator to overheat.
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Read less
184 of 223 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from nashotah, WI
Parts Used:
833697
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
noisy fan motor
rmv panel (5min) rmv fan/motor 3 screws (10 m) cut wire 2in from motor, re route remainder of wire to front so can strip for wire nuts. ( 10m) attach old fan to new motor, place in old opening ,3 screws, a little fussy to align, ( 15m ) route and strip wire from new motor , zip ties work well, wire nuts , plug in fridge vola, no noise, c lose up, reverse panel. ( 20m). i also took time to clean grilles with small vac and damp rag, ( looks and sounds like new) bob Wi.
Read less
38 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from corpus christi, TX
Parts Used:
WP2183456, WP10097204
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Refrigerator and Freezer would not cool
I took off the plastic cover plate that covers the overload and relay on the condensor. There are Three pins; two connecting to the relay and one to the overload. I removed the wires from the overload and relay and used a screwdriver to pry them from the pins on the condensor. I reinstalled the overload and relay and she works like new. When you shake the bad relay it sounds like there is broken glass in it.
Read less
29 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More