Models > PB-755ST

PB-755ST Echo Leaf Blower / Vacuum

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Models for PB-755ST

Keep searches simple, eg. "belt" or "pump".
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
Order now and your part arrives by Mar 29
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order now and your part arrives by Mar 29
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
Order now and your part arrives by Mar 29
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
Order now and your part arrives by Mar 29
Genuine Echo replacement part, this item is sold individually. This backpack Strap is used on the Backpack Blowers shown below. Two of these are needed on each of the models listed. They are adjust...
In Stock
Order now and your part arrives by Mar 29
$15.69
The job of the air filter is to prevent dirt and debris from making its way to the engine and clogging the carburetor or causing damage to the cylinder piston. There is one air filter included in this...
In Stock
Order now and your part arrives by Mar 29
$10.00
This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Engines and Motors. This is an in-tank fuel filter whic...
In Stock
Order now and your part arrives by Mar 29
This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel...
In Stock
Order now and your part arrives by Mar 29
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
Order now and your part arrives by Mar 29
This is an authentic OEM retainer cushion, sold independently. The retainer cushion is an isolator mount that secures the blowers fan housing and engine to the backpack frame. It consists of two steel...
In Stock
Order now and your part arrives by Mar 29
$6.51
This is an Authentic Manufacturer Sourced replacement part designed for use with a variety of Backpack Blowers. This part is made out of Plastic and it is Sold Individually. This item helps to secure ...
In Stock
Order now and your part arrives by Mar 29
This genuine OEM sourced replacement part is designed for use with blowers/trimmers. This is the spring for the spark plug boot. This spring is made out of metal and it is sold individually.
In Stock
Order now and your part arrives by Mar 29
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from NORWOOD, NJ
Parts Used:
A369000460
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
24 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Benny from BURTON, MI
Parts Used:
89011804262
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Added extra decals to the tube
Ordered two extra Echo Decals for the front tube. Original was not installed correctly from factory. So I added two extra to make it look better. This was for my ECHO 8010T Leaf Blower. Nice machine..
It looks real nice with four decals on the end..
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!