Models
>
HBN5451UC
HBN5451UC Bosch Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for HBN5451UC
Click on the best match to narrow your results.
- HBN5451UC (01) Bosch Wall Oven (BUILT-IN OVEN)
- HBN5451UC (03) Bosch Wall Oven (BUILT-IN OVEN)
- HBN5451UC (02) Bosch Wall Oven (BUILT-IN OVEN)
- HBN5451UC/04 Bosch Wall Oven (500 Seriesã‚â Single Wall Ovenã‚â 27-Inchã‚â Stainless Steel)
- HBN5451UC/05 Bosch Wall Oven (500 Series 27-Inch Single Wall Oven)
- HBN5451UC/06 Bosch Wall Oven (500 Series Single Wall Oven 27-Inch Stainless Steel)
- HBN5451UC/07 Bosch Wall Oven (500 Series Single Wall Oven 27-Inch Stainless Steel)
Keep searches simple, eg. "belt" or "pump".
$95.04
This bake element provides heat from the bottom of the oven for baking and roasting. It helps maintain even temperatures and is a reliable replacement for damaged or non-heating elements. Compatible w...
In Stock
Order now and your part arrives by Mar 26
$48.87
This genuine temperature sensor ensures precise heat regulation inside your oven for consistent cooking results and improved safety. Designed to measure the oven cavity temperature, it communicates wi...
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
$292.95
This programmed control module and circuit board serves as the central control system for a wall oven, managing critical functions such as temperature regulation, cooking modes, heating elements, cool...
In Stock
Order now and your part arrives by Mar 26
Special Order
Special Order
Special Order
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
Common Problems and Symptoms for HBN5451UC
Viewing 3 of 3Little to no heat when baking
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jaymie from Intercourse, PA
- Parts Used:
- 00642855
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Oven heating temp not turning off at set temp/overheating
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read more
ed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ludovic from MIAMI BEACH, FL
- Parts Used:
- 00791650
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
Need to replace bake element
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what w ... Read more ire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barry from MONROE, NY
- Parts Used:
- 00630873
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Oven was not heating properly
Took the one out of the box and take off the back plate and detach the sensor
Was this instruction helpful to you?
Thank you for voting!